The CURT weight distribution hitch is a specialized towing system that provides improved vehicle and trailer control by leveling the trailer and more evenly distributing its tongue weight across the trailer's and vehicle's axles. Weight distribution hitches are commonly used on travel trailers and campers but can also be applied to other large loads. CURT WD hitches come with a 2" x 2" shank and are compatible with class 3, 4 and most 5 trailer hitches, including Xtra Duty and Commercial Duty (2-1/2" replacement WD shank may be required), as well as some RV trailer hitches. While a weight distribution hitch will increase the gross trailer weight capacity of most trailer hitches, the vehicle's weight carrying capacity must be taken into consideration before towing a heavier trailer (NOTE: Never exceed the lowest weight capacity of any towing component).This trunnion bar weight distribution hitch features a heavy-duty formed head and square spring bars constructed from forged steel. It offers a gross trailer weight capacity up to 10,000 lbs. and a tongue weight capacity of 1,000 lbs. It also includes hook-up brackets, spring bar safety chains, a trailer ball and a pin and clip. To protect this hitch from scratching, chipping, rust and UV damage, it also comes with a durable black powder coat finish. For added sway control, this weight distribution hitch includes a sway control unit. While weight distribution hitches are an effective solution for stabilizing and leveling out your towing rig, they should not be considered a sway control. However, when combined with a CURT sway control kit, the WD hitch maximizes its effectiveness in controlling sway. The sway control kit includes a sway control unit, trailer balls to attach to the trailer and hitch, a reinforcement plate and attachment clips.

This short-lead mini fuse bypass switch helps avoid having to remove and replace fuses when flat towing your vehicle. It is designed for vehicle-specific application and integrates with CURT RV harnesses for a custom-fit solution. It includes a bypass harness, fuse holder and other components.

If you own multiple trailers or frequently tow a variety of loads, you know how much time and money are spent tailoring your towing system to each and every individual trailer. There is nothing more inconvenient than switching back and forth between a few different ball mounts and trying to remember which mount fits with which trailer. A CURT adjustable ball mount is your multipurpose towing solution. The CURT slim adjustable channel-style ball mount provides a weight capacity of up to 10,000 pounds and only weighs 15 pounds. It has a shank size of 2 inches x 2 inches and features two different trailer ball sizes to accommodate two different coupler sizes: 2-inch and 2-5/16-inch. It also features an adjustable shank assembly with multiple mounting holes for varying ball heights. Each trailer ball can be raised to a maximum of 3-1/2-inch rise or lowered to a maximum of 3-3/4-inch drop, allowing you to make your trailer completely level in any towing situation. The CURT slim adjustable ballmount offers a gross trailer weight capacity of up to 8,000 pounds for the 2-inch ball and 10,000 pounds for the 2-5/16-inch ball. It allows you to tow a variety of trailers, and it features two pin holes in the shank to be mounted at an 10-inch or 11-inch length. All CURT channel-style adjustable hitches are made with sturdy steel construction and come with a black carbide powder coat finish for long-lasting rust, scratch and UV resistance.

There are always some factors on the road you cannot control -- an irresponsible driver, adverse weather conditions -- but one thing you can control is the type of towing equipment you use. Just because there are threats out there, doesn't mean your towing adventures need to be dangerous. CURT offers a variety of towing safety products -- including safety chains, safety cables, hooks, links and more -- to make sure you have confidence to Bring It and trustworthy equipment to Bring It safely. CURT snap hooks are a highly secure way to connect your safety chains from your trailer to your tow vehicle. They feature a spring-loaded safety latch that turns the hook into a closed loop. Similar to a quick link, the safety latch allows for a safety chain connection that won't come loose from vehicle vibrations or jarring on uneven terrain. Snap hooks also feature a strong steel construction and come with a zinc-plated finish to outlast the elements. This particular snap hook has a 5/8" diameter eye and offers a gross trailer weight capacity of 3,500 lbs. Remember, when attaching safety chains, the chains should be cross underneath the trailer coupler, and each hook and chain must be rated to meet or exceed the gross weight of the trailer.

CURT snap locks are designed to make rewiring your trailer or splicing in a converter easy. They provide a more reliable connection for your trailer's electrical system by keeping the wires more secure and better protected. A snap lock is a two-channel wire connection device that eliminates the need for stripping and soldering wires. It is designed to splice into an existing wire without requiring you to cut, crimp or strip the existing wire. To connect two wires using a snap lock, simply insert the existing wire and tap wire into the snap lock and squeeze the special snap lock blade with a pair of pliers. Then, fold the latching mechanism over. Just like that a connection is made with no need to worry about hot soldering irons, wire strippers or sharp wires poking out. With the snap lock's safety lock latch, you can be confident that wires will stay properly connected through all kinds of weather. CURT snap locks, also known as scotch locks or quick-splice connectors, come in a variety of sizes and feature a high-impact plastic housing with an aluminum blade. The snap locks in this package of 100 are designed to fit 18-14 gauge wire.

CURT snap locks are designed to make rewiring your trailer or splicing in a converter easy. They provide a more reliable connection for your trailer's electrical system by keeping the wires more secure and better protected. A snap lock is a two-channel wire connection device that eliminates the need for stripping and soldering wires. It is designed to splice into an existing wire without requiring you to cut, crimp or strip the existing wire. To connect two wires using a snap lock, simply insert the existing wire and tap wire into the snap lock and squeeze the special snap lock blade with a pair of pliers. Then, fold the latching mechanism over. Just like that a connection is made with no need to worry about hot soldering irons, wire strippers or sharp wires poking out. With the snap lock's safety lock latch, you can be confident that wires will stay properly connected through all kinds of weather. CURT snap locks, also known as scotch locks or quick-splice connectors, come in a variety of sizes and feature a high-impact plastic housing with an aluminum blade. The snap locks in this package of 100 are designed to fit 12-10 gauge wire.

CURT snap locks are designed to make rewiring your trailer or splicing in a converter easy. They provide a more reliable connection for your trailer's electrical system by keeping the wires more secure and better protected. A snap lock is a two-channel wire connection device that eliminates the need for stripping and soldering wires. It is designed to splice into an existing wire without requiring you to cut, crimp or strip the existing wire. To connect two wires using a snap lock, simply insert the existing wire and tap wire into the snap lock and squeeze the special snap lock blade with a pair of pliers. Then, fold the latching mechanism over. Just like that a connection is made with no need to worry about hot soldering irons, wire strippers or sharp wires poking out. With the snap lock's safety lock latch, you can be confident that wires will stay properly connected through all kinds of weather. CURT snap locks, also known as scotch locks or quick-splice connectors, come in a variety of sizes and feature a high-impact plastic housing with an aluminum blade. The snap locks in this package of 100 are designed to fit 18-14 gauge wire.

CURT snap locks are designed to make rewiring your trailer or splicing in a converter easy. They provide a more reliable connection for your trailer's electrical system by keeping the wires more secure and better protected. A snap lock is a two-channel wire connection device that eliminates the need for stripping and soldering wires. It is designed to splice into an existing wire without requiring you to cut, crimp or strip the existing wire. To connect two wires using a snap lock, simply insert the existing wire and tap wire into the snap lock and squeeze the special snap lock blade with a pair of pliers. Then, fold the latching mechanism over. Just like that a connection is made with no need to worry about hot soldering irons, wire strippers or sharp wires poking out. With the snap lock's safety lock latch, you can be confident that wires will stay properly connected through all kinds of weather. CURT snap locks, also known as scotch locks or quick-splice connectors, come in a variety of sizes and feature a high-impact plastic housing with an aluminum blade. The snap locks in this package of 100 are designed to fit 18-14 gauge wire. They come with a special sealant gel that surrounds the wires and offers the best possible protection against moisture and corrosion.

For any and all types of trailers with electric trailer brakes, a CURT breakaway kit provides you with the equipment you need to be prepared. We offers three different complete breakaway systems to accommodate various trailer sizes and meet your specific towing needs. All of our breakaway kits are tested for your safety and meet DOT requirements for holding and breakaway situations. The CURT Soft-Trac 1 breakaway system comes with a 12-volt, 5-amp battery and a nylon breakaway switch for reliable activation. The battery is designed to be rechargeable for long-term use, and the breakaway switch comes with a 48" lanyard to fit most vehicle-trailer combinations. This particular kit does not include a battery charger. To keep the battery well-protected from the elements and tampering, this Soft-Trac 1 breakaway kit also comes with a lockable top-load battery case. The case is made from durable plastic to be rust-free and features a screw-tight lid with rubber gaskets to maintain good wiring connections. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit.

For any and all types of trailers with electric trailer brakes, a CURT breakaway kit provides you with the equipment you need to be prepared. We offers three different complete breakaway systems to accommodate various trailer sizes and meet your specific towing needs. All of our breakaway kits are tested for your safety and meet DOT requirements for holding and breakaway situations. The CURT Soft-Trac 1 breakaway system comes with a 12-volt, 5-amp battery and a nylon breakaway switch for reliable activation. The battery is designed to be rechargeable for long-term use, and the breakaway switch comes with a 48" lanyard to fit most vehicle-trailer combinations. This particular kit also includes a 12-volt battery charger. To keep the battery well-protected from the elements and tampering, this Soft-Trac 1 breakaway kit also comes with a lockable top-load battery case. The case is made from durable plastic to be rust-free and features a screw-tight lid with rubber gaskets to maintain good wiring connections. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit.

For any and all types of trailers with electric trailer brakes, a CURT breakaway kit provides you with the equipment you need to be prepared. We offers three different complete breakaway systems to accommodate various trailer sizes and meet your specific towing needs. All of our breakaway kits are tested for your safety and meet DOT requirements for holding and breakaway situations. The CURT Soft-Trac 2 breakaway system comes with a 12-volt, 5-amp battery and a nylon breakaway switch for reliable activation. The battery is designed to be rechargeable for long-term use, and the breakaway switch comes with a 48" lanyard to fit most vehicle-trailer combinations. This particular kit does not include a battery charger. To keep the battery well-protected from the elements and to allow for convenient mounting on your trailer, this Soft-Trac 2 breakaway kit also comes with a top-load battery case. The case is made from durable plastic to be rust-free and features a metal mounting bracket with a 3-1/8" hole, to mount on the trailer tongue or on a jack post. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit.

For any and all types of trailers with electric trailer brakes, a CURT breakaway kit provides you with the equipment you need to be prepared. We offers three different complete breakaway systems to accommodate various trailer sizes and meet your specific towing needs. All of our breakaway kits are tested for your safety and meet DOT requirements for holding and breakaway situations. The CURT Soft-Trac 2 breakaway system comes with a 12-volt, 5-amp battery and a nylon breakaway switch for reliable activation. The battery is designed to be rechargeable for long-term use, and the breakaway switch comes with a 48" lanyard to fit most vehicle-trailer combinations. This particular kit also includes a 12-volt battery charger. To keep the battery well-protected from the elements and to allow for convenient mounting on your trailer, this Soft-Trac 2 breakaway kit also comes with a top-load battery case. The case is made from durable plastic to be rust-free and features a metal mounting bracket with a 3-1/8" hole, to mount on the trailer tongue or on a jack post. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit.

Even down to the simplest components, CURT is always looking for ways to improve your towing experience. CURT wire terminals are vinyl-insulated and available in a range of sizes to fit different gauges of wiring and different size bolts. Spade terminals are preferred for their quick-removal convenience. These spade terminals are color-coded and designed to fit 12-10 gauge wire and a #10 stud. This package includes 100 terminals. CURT terminals can be used for all sorts of wiring and rewiring projects on your trailer or tow vehicle. Terminals may be specifically called for during the installation of certain electrical devices, but in general, they can be used for any number of electrical connection applications using the appropriate size screw or bolt. They offer a more secure mount and a better connection than a bare wire alone. One of the most common ways an electrical terminal is used is in making a ground connection for a connector or other electrical component.

Even down to the simplest components, CURT is always looking for ways to improve your towing experience. CURT wire terminals are vinyl-insulated and available in a range of sizes to fit different gauges of wiring and different size bolts. Spade terminals are preferred for their quick-removal convenience. These spade terminals are color-coded and designed to fit 16-14 gauge wire and a #10 stud. This package includes 100 terminals. CURT terminals can be used for all sorts of wiring and rewiring projects on your trailer or tow vehicle. Terminals may be specifically called for during the installation of certain electrical devices, but in general, they can be used for any number of electrical connection applications using the appropriate size screw or bolt. They offer a more secure mount and a better connection than a bare wire alone. One of the most common ways an electrical terminal is used is in making a ground connection for a connector or other electrical component.

Even down to the simplest components, CURT is always looking for ways to improve your towing experience. CURT wire terminals are vinyl-insulated and available in a range of sizes to fit different gauges of wiring and different size bolts. Spade terminals are preferred for their quick-removal convenience. These spade terminals are color-coded and designed to fit 22-18 gauge wire and a #10 stud. This package includes 100 terminals. CURT terminals can be used for all sorts of wiring and rewiring projects on your trailer or tow vehicle. Terminals may be specifically called for during the installation of certain electrical devices, but in general, they can be used for any number of electrical connection applications using the appropriate size screw or bolt. They offer a more secure mount and a better connection than a bare wire alone. One of the most common ways an electrical terminal is used is in making a ground connection for a connector or other electrical component.

CURT specialty locks are a line of unique towing locks that provide the security you need to keep that trailer and those toys safe from theft. It does not matter where the road takes you; if you are towing, you want the peace of mind to be able to enjoy yourself, and that only comes with a CURT lock. The CURT spare tire lock features a chrome-plated finish for a sharp look and protection against the elements. It fits side-mount spare tires and is key-operated with two keys included. For all of your trailer security needs, look to CURT for the lock to keep that boat, RV, toy hauler -- whatever it may be! -- safe and sound.

It takes a lot of power to stop a moving trailer, especially when that trailer is hauling livestock, construction materials, industrial equipment or other heavy-duty cargo. Play it safe when you tow and give your trailer brakes the control they need with a CURT trailer brake controller and brake controller harness. This brake controller harness comes with an OEM plug to connect to the vehicle and has pigtails to splice into a brake controller. It features color-coded wires to coordinate with the appropriate electrical functions and comes with two feet of wire for convenient installation. This splice-in harness also comes with a protective slit loom sleeve and can easily be installed using CURT snap locks. It is designed to be compatible with certain years of the Dodge Durango and Jeep Grand Cherokee. For a complete listing of vehicle compatibility, see the application info.

It takes a lot of power to stop a moving trailer, especially when that trailer is hauling livestock, construction materials, industrial equipment or other heavy-duty cargo. Play it safe when you tow and give your trailer brakes the control they need with a CURT trailer brake controller and brake controller harness. This brake controller harness comes with an OEM plug to connect to the vehicle and has pigtails to splice into a brake controller. It features color-coded wires to coordinate with the appropriate electrical functions and comes with two feet of wire for convenient installation. This splice-in brake controller harness can easily be installed using CURT snap locks and is designed to be compatible with certain years of the Buick Enclave, GMC Acadia, Chevy Traverse and Saturn Outlook. For a complete listing of vehicle compatibility, see the application info.

Just because you install 5th wheel brackets and rails in your truck bed does not mean your truck is limited to one type of towing. To give your truck the tools it needs to be the ultimate towing machine, CURT offers a gooseneck adapter for a 5th wheel setup. A 5th wheel / gooseneck plate is essentially a gooseneck hitch that mounts into a set of 5th wheel rails just like a 5th wheel trailer hitch. This allows you to pull both 5th wheel trailers and gooseneck trailers with the same pickup truck. CURT 5th wheel gooseneck hitches feature four pin-and-clip attachment points for a solid installation and quick removal when necessary, giving you full access and full use of your truck bed for hauling other loads. Best of all, our gooseneck adapter plates mount onto all industry standard rails. This particular 5th wheel to gooseneck adapter plate, the Spyder gooseneck, features an impressive gross trailer weight capacity of 25,000 lbs., a tongue weight capacity of 6,250 lbs. and offers a 2-5/16" trailer ball for pulling most types of gooseneck trailers, including livestock trailers, chopper boxes, gravity boxes, industrial equipment haulers, flatbeds and more. CURT 5th wheel gooseneck plates and gooseneck 5th wheel adapters are the ultimate versatility tools in heavy-duty towing. We coat our 5th wheel gooseneck hitches in a black carbide powder coat to ensure that they are highly resistant to rust, scratching and UV damage.

Just because you install 5th wheel brackets and rails in your truck bed does not mean your truck is limited to one type of towing. To give your truck the tools it needs to be the ultimate towing machine, CURT offers a gooseneck adapter for a 5th wheel setup. A 5th wheel / gooseneck plate is essentially a gooseneck hitch that mounts into a set of 5th wheel rails just like a 5th wheel trailer hitch. This allows you to pull both 5th wheel trailers and gooseneck trailers with the same pickup truck. CURT 5th wheel gooseneck hitches feature four pin-and-clip attachment points for a solid installation and quick removal when necessary, giving you full access and full use of your truck bed for hauling other loads. Best of all, our gooseneck adapter plates mount onto all industry standard rails (40K base rails #16205 required to reach 30K capacity). This particular 5th wheel to gooseneck adapter plate, the Spyder gooseneck, features an impressive gross trailer weight capacity of 30,000 lbs., a tongue weight capacity of 7,500 lbs. and offers a 2-5/16" trailer ball for pulling most types of gooseneck trailers, including livestock trailers, chopper boxes, gravity boxes, industrial equipment haulers, flatbeds and more. CURT 5th wheel gooseneck plates and gooseneck 5th wheel adapters are the ultimate versatility tools in heavy-duty towing. We coat our 5th wheel gooseneck hitches in a black carbide powder coat to ensure that they are highly resistant to rust, scratching and UV damage.

A sway control unit is an inexpensive solution to the problem of a wandering trailer. CURT sway control units are designed to attach to your vehicle and trailer at the coupling point and counteract any lateral movement in your trailer, keeping your tow load straighter on the road and giving you more control over your vehicle. The sway bar uses a material like that used in brake pads to provide the necessary resistance while still allowing your vehicle to complete proper turns with your trailer attached. The sway control mounts onto the frame of your trailer and connects to the vehicle's ball mount using a separate trailer ball from that used for coupling the trailer. CURT sway controls are adjustable and easy to install. They come with a sway unit, a trailer-mounted attachment ball and bolts, a hitch-mounted attachment ball, a weld-on tab, a mount reinforcement plate and attachment clips. Though a weight distribution hitch is not an ideal solution for trailer sway on its own, CURT weight distribution hitches are made to be combined with a sway control unit and many are available with a sway controls included for a complete package. CURT also carries ball mounts that are specially designed to work with a sway control kit, having a sway tab welded right onto the ball mount platform.

CURT specialty ball mounts are a group of exceptional towing products, built to succeed where others fear to tread. From the back roads of overrun forests to the muddy fields of small town farms, towing looks a little different, and that means different demands on your towing equipment. CURT offers a full lineup of unique ball mounts that are made to tackle the rougher side of towing while still being able to fit a standard 2" x 2" receiver tube. This sway control ball mount is perfect for adding a sway control unit to your vehicle-trailer combination without using a weight distribution hitch. It features a standard ball mount design for towing a trailer but also comes with a welded sway control tab to attach the CURT sway control unit #17200. While the trailer ball platform is equipped with a 1" hole to accept a standard trailer ball, the sway control tab offers a 5/8" diameter to mount the CURT sway control ball #40093.This specialty ball mount has a gross trailer weight capacity of 7,500 lbs. and a tongue weight capacity of 750 lbs., making it an excellent choice for larger trailers that may require sway control. For long-lasting reliability, it comes finished in our gloss black powder coating to provide the corrosion, scratch and UV resistance needed to survive anything you throw its way.

CURT Switch Ball trailer balls are a breakthrough in trailer ball technology. As a result of CURT innovation and engineering genius, Switch Balls offer the ultimate in convenience and reliability for a variety of light-duty and medium-duty towing applications. Essentially, a CURT Switch Ball is a trailer ball shank with a removable head. With its exclusive J-groove design, the Switch Ball trailer ball allows different heads or ball sizes to be places on the shank for accommodating different coupler sizes. This means there is no need to switch between ball mounts or even to own a second ball mount to fit an additional trailer. When you need to make the switch, simply twist the Switch Ball head, lift it off and twist on another. The J-groove ensures a solid hold on your trailer, while still allowing for easy removal of the trailer ball without tools or pins. For protecting your Switch Ball trailer ball shank when not in use, the CURT rubber trailer ball cover is a perfect fit. This cover is designed to fit Switch Ball shanks with a 1" neck diameter and 3/4" threaded shank.

CURT Switch Ball trailer balls are a breakthrough in trailer ball technology. As a result of CURT innovation and engineering genius, Switch Balls offer the ultimate in convenience and reliability for a variety of light-duty and medium-duty towing applications. Essentially, a CURT Switch Ball is a trailer ball shank with a removable head. With its exclusive J-groove design, the Switch Ball trailer ball allows different heads or ball sizes to be places on the shank for accommodating different coupler sizes. This means there is no need to switch between ball mounts or even to own a second ball mount to fit an additional trailer. When you need to make the switch, simply twist the Switch Ball head, lift it off and twist on another. The J-groove ensures a solid hold on your trailer, while still allowing for easy removal of the trailer ball without tools or pins. For protecting your Switch Ball trailer ball shank when not in use, the CURT rubber trailer ball cover is a perfect fit. This cover is designed to fit Switch Ball shanks with a 1" neck diameter and 3/4" threaded shank.