Car Rack Discount Store

The BAKFlip F1 is aesthetically similar to BAK’s best-selling BAKFlip G2, although it features one key difference—the substitution of high-density foam-core panels in place of the G2’s solid-core aluminum panels. Though retaining aluminum lower skins, the BAKFlip F1 employs heavy-duty FRP (fiber-reinforced plastic) top skins for superior durability. Not only are these panels aesthetically pleasing, with their glossy textured finish, but they’re also impact-resistant with their rigid high-density foam core. The panels are also exceptionally stout, withstanding up to 400 pounds of evenly distributed cargo.

This 2772mm/109.1'' long, full-size, Slimline II cargo carrying roof rack kit for your Ford E150/E250/E350 Regular Cab contains the Slimline II Tray and Wind Deflector, as well as 10 Gutter Mount Legs for mounting the Tray to the vehicle. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*

This 1358mm/53.5'' long, 1/2 size, Slimline II cargo carrying roof rack kit for your Jeep Wrangler 4xe contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*

This low-profile flat deck Slimsport rack has a load-carrying area of 1677mm (66'') x 1417mm(55.8''). The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories. Effortlessly access your Slimsport cargo with the RRAC190. Easily add on the RRAC182 (sold separately) for all Front Runner side mount accessories. The included standard full fairing with rubber edge trim makes the rack ultra-quiet and allows full operation of the moonroof Need a lightbar? The optional RRAC236 (sold separately) has a 40'' cutout to allow the use of LIGH213 (sold separately). Fitment guide and all mounting hardware included. RRAC213 is required for installation (sold separately). Drilling required for fitment (all hardware included). Note: Under Rack Tables and some side mount accessories such as JADA010 and RRAC103 are not compatible with the Slimsport rack kit range. Note: Only compatible with rear factory antenna or when no front antenna is fitted. All Front Runner Racks are backed by a Limited Lifetime Warranty*

Secures to the rear of the Mercedes/Dodge/Freightliner Sprinter vans. Simply mounts to the factory door hinges and door face with minimal modification to the vehicle. Made from high strength steel and powder coated in the same durable black powder coating as all Front Runner racks. Steps have rubber inserts for added grip when reaching on top of the Sprinter vans roof rack. Install or remove effortlessly. Note: Suitable for all low roof, high roof and super high roof vans. NOTE: *Does not work with 270 Degree opening rear doors.

A complete camp table and table storing solution. Effortlessly take a previously cumbersome luxury item on any vehicle based adventure. Pro Stainless Steel Camp Table - by Front Runner: The extruded aluminum frame nests into the storage brackets and is secured with the table latch eliminating any excessive noise. A durable stainless steel table top ensures a hygienic surface for the preparation and serving of meals. The table frame and legs are powder-coated black with the same durable, corrosion resistant coating as the Front Runner Slimline II Roof Rack. The Legs easily unfold and with the open-and-lock mechanism are kept firmly in place. Rounded glass filled nylon corners prevent any accidental knicks or damage and provide a grip point when removing the table from under your roof rack. Under-Rack Table Brackets - by Front Runner: A no-noise and secure storage solution designed specifically for the TBRA015. The brackets can be mounted both parallel and perpendicular to the roof rack's slats giving the options to access to the table from the side or rear of the vehicle. Easy installation. Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack. Under-Rack Table Slides Latch - by Front Runner: Keeps the TBRA015 securely stored in the Under-Rack Table Brackets - by Front Runner. Secured to the top of the Slimline II roof rack using the T-slot and clamps over the lip of the table to keep it in place. A rubber insert prevents rattling and damage to the table. Spring loaded for ease of use. Lockable for added security. Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack. NOTE: Table fitment requires 65mm (2.5'') clearance from under the rack to highest point of the roof.Side mounting requires 5 open slatsRear mounting not suitable for vehicles with rear roof antennaStill unsure? Contact the Front Runner Help Center