An unexpected error has occurred.
Packages will appear here as you progress through the Gear Wizard.
If you own multiple trailers or frequently tow a variety of loads, you know how much time and money are spent tailoring your towing system to each and every individual trailer. There is nothing more inconvenient than switching back and forth between a few different ball mounts and trying to remember which mount fits with which trailer. A CURT adjustable ball mount is your multipurpose towing solution. This replacement tube mount for the CURT adjustable tri-ball mount #45799 is designed to mount the replacement tri-ball head #45800. It is intended to mount onto the adjustable shank #45059 for easy height adjustment and trailer levelling. Mounting requires the three 5/8" diameter pins and clips included with the complete tri-ball assembly. All CURT adjustable ball mounts are made with sturdy steel construction and come with a durable powder coat finish for long-lasting rust, scratch and UV resistance.
This replacement center pin is for the CURT A25 or A30 5th wheel hitch. It is designed to replace the existing pin for securing the 5th wheel head in the hitch body. This package comes with the pin only. The other hitch components are not included.
This replacement handle is for all CURT A-series 5th wheel hitches. It is designed to replace the existing handle for operating the 5th wheel jaws when coupling and uncoupling from the trailer kingpin. This package comes with the handle and hardware only. The hitch is not included.
For any and all types of trailers with electric trailer brakes, a CURT breakaway kit provides you with the equipment you need to be prepared. We offers three different complete breakaway systems to accommodate various trailer sizes and meet your specific towing needs. All of our breakaway kits are tested for your safety and meet DOT requirements for holding and breakaway situations. This breakaway lanyard is made to fit the CURT breakaway switch #52010. With a 48" cable and high-temp nylon pull, it offers reliable activation of your trailer brakes, when used in combination with the breakaway switch and complete breakaway kit. The 48" length accommodates most vehicle-trailer combinations. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit.
This replacement anti-rattle bumper is designed to fit CURT adjustable channel mounts #45900, #45901 and #45907. It fits into the back of the channel mount and helps reduce vibrations.
Trailer lights can be fragile, but they are completely necessary for towing. Whether you're a contractor on your way to the jobsite or just a casual fisherman heading to the boat landing, you need working trailer lights to tow safely and legally. For any towing setup, CURT offers quality, DOT-approved trailer lighting, including complete wiring kits, combination lights and replacement lighting components. This CURT combination light replacement lens is designed to mount on the face of the taillight, facing the rear, and is able to fit all CURT combination lights. It features a red molded construction and attaches easily with four screws.
Trailer lights can be fragile, but they are completely necessary for towing. Whether you're a contractor on your way to the jobsite or just a casual fisherman heading to the boat landing, you need working trailer lights to tow safely and legally. For any towing setup, CURT offers quality, DOT-approved trailer lighting, including complete wiring kits, combination lights and replacement lighting components. This CURT combination light replacement lens is designed to mount on the side of the taillight and is able to fit CURT combination lights #53440 and #53441. It features a red molded construction and attaches easily with two screws.
This replacement coupler tube is for the CURT CrossWing 5th wheel hitch for gooseneck. It is designed to replace the existing tube that allows the hitch to be mounted onto a gooseneck ball. This package comes with the tube and hardware. The hitch and other components are not included.
This replacement coupler tube hardware is for the CURT CrossWing 5th wheel hitch for gooseneck applications. It is designed to replace the existing hardware that attaches tube to the CrossWing hitch. This package comes with the hardware only. The tube and other components are not included.
These replacement grips are for the CURT CrossWing 5th wheel hitch. They are designed to replace the existing grips on the body for lifting the hitch in or out of the truck bed. This package comes with the grips only. The hitch and other components are not included.
This replacement handle is for the CURT CrossWing 5th wheel hitch. It is designed to replace the existing handle for operating the 5th wheel jaw mechanism when coupling and uncoupling from the trailer kingpin attachment. This package comes with the handle and hardware only. The hitch is not included.
This replacement head weldment is for the CURT CrossWing 5th wheel hitch. It is designed to replace the existing head that mounts into the base of the hitch. This package comes with the head piece and handle only. The hitch and other components are not included.
This replacement hardware kit is for the CURT CrossWing 5th wheel hitch. It is designed to replace the existing hardware for securing the 5th wheel head in place. This package comes with the hardware only. The hitch and other components are not included.
This set of skid pads helps protect your truck bed when towing with the CURT CrossWing 5th wheel hitch. They install underneath the hitch, between the hitch legs and truck bed protector supports, and are constructed from tough poly for lasting use. Two skid pads are included in this package (5th wheel hitch sold separately).
This replacement head weldment is for the CURT CrossWing 5th wheel hitch. It is designed to replace the existing head that attaches to the kingpin on the trailer. This package comes with the head piece only. The hitch and other components are not included.
This replacement cylinder guide pin is for all CURT Double Lock EZr and original Double Lock gooseneck hitches. It is designed to replace the existing guide pin within the hitch. This package comes with the pin only. The hitch, handle and ball are not included.
This replacement handle is for all CURT Double Lock EZr and original Double Lock gooseneck hitches. It is designed to replace the existing handle for operating the locking pins for raising and lowering the gooseneck ball. This package comes with the handle and hardware only. The ball and hitch are not included.
This replacement spring is for all CURT Double Lock EZr and original Double Lock gooseneck hitches. It is designed to replace the existing spring on the handle for engaging the locking pins when raising or lowering the gooseneck ball. This package comes with the spring only. The hitch and handle are not included.
This replacement locking pin is for all CURT Double Lock EZr and original Double Lock gooseneck hitches. It is designed to replace the existing locking pin within the hitch for securing the gooseneck ball in the raised or lowered position. This package comes with the lock pin only. The hitch, handle and ball are not included.
This replacement trim ring is designed to fit all CURT Double Lock EZr and original Double Lock gooseneck hitches. It replaces the existing trim ring on the hitch and provides a clean, finished look in the truck bed. This package includes the trim ring only. The hitch is not included.
This replacement Center Locator is for CURT Double Lock EZr gooseneck hitches #60611 and #60619. It is designed to streamline the installation process by eliminating the need to measure where the gooseneck ball hole should be in the truck bed. It provides a guide to simply drill a pilot hole up through the bottom of the bed, using the hitch hole as a guide. This package comes with one Center Locator only. The hitch and other components are not included.
This replacement safety chain anchor kit is designed to fit all CURT Double Lock EZr gooseneck hitches. The U-bolt anchors replace the existing anchors on the hitch and provide a secure attachment point for the trailer safety chains in the truck bed. This package includes the anchors and hardware only. The hitch is not included.
This replacement dual ball is designed to fit the CURT adjustable channel mount #45900 or #45926. It has two ball sizes to fit 2-inch or 2-5/16-inch trailer couplers. NOTE: This package includes the dual ball only. Shank sold separately.
This replacement dual ball is designed to fit the CURT adjustable channel mount #45902 or #45927. It has two ball sizes to fit 2-inch or 2-5/16-inch trailer couplers. NOTE: This package includes the dual ball only. Shank sold separately.