Rhino-Rack

Provide extra cover to your Rhino-Rack Sunseeker 2.0 Awning with the specifically designed Awning Extension. With the Awning extension, not only will you be provided with additional shade, but you can create a little more privacy and keep the breeze

The Rhino-Rack Sunseeker 2.5m Awning is a must-have for any great adventure. Savour the great outdoors with the added benefit of UV50+ rating on your portable shade.

Thanks to Rhino-Rack's Awning Extension, owners of the Sunseeker 2.5 and Batwing awning range are able to extend the coverage of their shade out by a further 2m.

The Rhino-Rack Backbone is a mounting system for your TOYOTA LANDCRUISER 250 AND LEXUS GX550. Connecting to your vehicle's roof via 3 bases on each side, it allows for a Rhino-Rack Pioneer System to be fitted on top.

If you're after a roof rack that is adaptable, easy to use, strong and light, then the Rhino-Rack Vortex 2500 roof rack is the ideal solution. No need for specialist fitment - you can install the Vortex 2500 to your vehicle yourself at home in a few quick, easy steps. Utilising our highly regarded Vortex bars, this system offers you compatibility with a wide selection of Rhino-Rack accessories.

The VA-FK2 is a fitting kit designed to fit the Vortex bar to RLCP legs.

The Vortex RCL roof rack system is specifically molded to fit a select range of vehicles which feature factory mounting points. By attaching via your vehicle's mounting points, you can be assured of a perfect fit.

The Vortex RCL roof rack system is specifically molded to fit a select range of vehicles which feature factory mounting points. By attaching via your vehicle's mounting points, you can be assured of a perfect fit.

The RX200-4 roof rack system is designed suitable for Hyundai Tucson Gen4 that feature flush rails. ‘Built Rhino Tough’ and vigorously tested to meet the needs of any adventurer, the RX200-4 leg paired with the Rhino-Rack Vortex bars (VA126B)is a highly anticipated fit for the newHyundai Tucson Gen4Flush Rail and offers you compatibility with a wide selection of Rhino-Rack accessories.

The RX200-4 roof rack system is designed specifically for Kia Sportage Gen5 NQ5 that feature raised rails. ‘Built Rhino Tough’ and vigorously tested to meet the needs of any adventurer, the RX200-4 leg paired with the Rhino-Rack Vortex bars (VA126B)is a highly anticipated fit for the Kia Sportage Gen5 NQ5 that feature - Raised Rail and offers you compatibility with a wide selection of Rhino-Rack accessories.

The RX200-4 roof rack system is designed specifically for Mitsubishi Outlander Gen4 - Flush Rail . ‘Built Rhino Tough’ and vigorously tested to meet the needs of any adventurer, the RX200-4 leg paired with the Rhino-Rack Vortex bars (VA126B)is a highly anticipated fit for the Mitsubishi Outlander Gen4 - Flush Rail and offers you compatibility with a wide selection of Rhino-Rack accessories.

The Rhino-Rack Vortex StealthBar suits vehicles with raised roof rails. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load.

The Rhino-Rack Vortex StealthBar suits vehicles with raised roof rails. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load.

The Rhino-Rack Vortex StealthBar suits vehicles with raised roof rails. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load.

The SX roof rack system is designed specifically for use with roofs that feature rails. Easy to install and remove, it comes with security hardware to protect your racks against theft.

The SX roof rack system is designed specifically for use with roofs that feature rails. Easy to install and remove, it comes with security hardware to protect your racks against theft.

The Rhino-Rack Heavy Duty Bar is made from scratch and dent resistant aluminum. All bars include the rubber strip and end caps.

The Rhino-Rack Heavy Duty Bar is made from scratch and dent resistant aluminum. All bars include the rubber strip and end caps.

The Rhino-Rack Backbone is a mounting system for your Nissan Armada. Connecting to your vehicle's roof via 3 bases on each side, it allows for a Rhino-Rack Pioneer System to be fitted on top.

The Rhino-Rack Backbone is a mounting system for your Land Rover Discovery 3 & 4. Connecting to your vehicle's roof via 4 bases on each side, it allows for a Rhino-Rack Pioneer System to be fitted on top.

Rhino-Rack's DK kits are used in all the 2500 roof rack systems. The kit consists of the pads and clamps which attach to your vehicle's roof.

Rhino-Rack's DK kits are used in all the 2500 roof rack systems. The kit consists of the pads and clamps which attach to your vehicle's roof.

Rhino-Rack's DK kits are used in all the 2500 roof rack systems. The kit consists of the pads and clamps which attach to your vehicle's roof.

Rhino-Rack's DK kits are used in all the 2500 roof rack systems. The kit consists of the pads and clamps which attach to your vehicle's roof.