An unexpected error has occurred.
Packages will appear here as you progress through the Gear Wizard.
The Baja Designs S2 Sport Fog light replacement kit for the 2025-on Toyota 4Runner TRD Pro/Trailhunter models are designed to replace your factory fog lights while maintaining the OEM fit and finish.
This premium LED lighting kit is configured with four S2 Sports offering 1,581 raw lumens each to illuminate zones 1 and 2 in front of your vehicle makes this the perfect trail ready solution.
Included within the kit is mounting brackets, mounting hardware and splitter harnesses that allow use of the stock switch.
All Baja Designs lights are backed by our 30-day satisfaction guarantee and lifetime limited warranty for the ultimate in purchase protection.
ELS Scores:
Kit Includes:
Note: This kit fits the TRD Pro/Trailhunter models only.
Specifications (Per Light):
The Baja Designs Advantage:
The Baja Designs S2 Sport Fog light replacement kit for the 2025 Toyota 4Runner (non-TRD Pro models) has been designed to replace your factory fog lights while maintaining the OEM fit and finish.
This premium LED lighting kit is configured with four S2 Sports offering 1,581 raw lumens each to illuminate zones 1 and 2 in front of your vehicle makes this the perfect trail ready solution.
Included within the kit is mounting brackets, mounting hardware and splitter harnesses that allow use of the stock switch. All Baja Designs lights are backed by our 30-day satisfaction guarantee and lifetime limited warranty for the ultimate in purchase protection.
ELS Scores:
S2 Sport Wide Cornering Clear: ELS 72 degree/ 7.1/ 80'/ 1112
S2 Sport setup includes the following:
Note: This kit will NOT work on TRD Pro models.
Specifications (Per Light):
The Baja Designs S2 Sport Fog light replacement kit for the 2025 Toyota 4Runner (non-TRD Pro models) has been designed to replace your factory fog lights while maintaining the OEM fit and finish.
This premium LED lighting kit is configured with four S2 Sports offering 1,581 raw lumens each to illuminate zones 1 and 2 in front of your vehicle makes this the perfect trail ready solution.
Included within the kit is mounting brackets, mounting hardware and splitter harnesses that allow use of the stock switch. All Baja Designs lights are backed by our 30-day satisfaction guarantee and lifetime limited warranty for the ultimate in purchase protection.
ELS Scores:
S2 Sport Wide Cornering Clear: ELS 72 degree/ 7.1/ 80'/ 1112
S2 Sport setup includes the following:
Note: This kit will NOT work on TRD Pro models.
Specifications (Per Light):
The Baja Designs Grille Light Kit for the 2025 Toyota 4Runner TRD Pro and Trailhunter models offers a powerful lighting solution tailored for off-road adventures. This kit is offered in clear or baja amber, allowing enthusiasts to replace or add a light system to the TRD Pro grille.
Featuring a 10-inch S8 light bar that delivers 6,324 raw lumens, along with two S2 Pro LED light pods, each producing 2,245 raw lumens. Together, these lights provide excellent illumination across lighting zones 1-4, ensuring optimal visibility in various conditions.
With dual independent wiring harnesses, the S8 light bar and the S2 Pro light pods can be controlled separately for enhanced functionality. The S8 light bar illuminates lighting zones 3-4 for greater distance down the trail, while its amber backlight adds a stylish marker light for increased visibility when the main lights are off.
For near-field visibility, the S2 Pros, equipped with a wide cornering, light up zones 1-2, ensuring comprehensive coverage close to the vehicle.
This compact yet high-performance kit is designed to enhance both functionality and aesthetics. It includes everything you need for a seamless installation on the 2025 Toyota 4Runner TRD Pro grille-lights, mounting brackets, wiring harnesses, and more.
Featuring Baja Designs' innovative uService technology, you can easily swap or replace lenses and adjust beam patterns without voiding the warranty, giving you full control over your lighting setup.
Backed by a 30-day satisfaction guarantee and a lifetime limited warranty, this kit ensures reliable performance and peace of mind. Please Note: This kit is designed exclusively for the Toyota Tacoma TRD Pro grille. Some trimming is required, please see instructions.
Key Features:
Kit Includes:
S8 Specifications (Per Light):
S2 Pro Specifications (Per Light):
The Baja Designs Grille Light Kit for the 2025 Toyota 4Runner TRD Pro and Trailhunter models offers a powerful lighting solution tailored for off-road adventures. This kit is offered in clear or baja amber, allowing enthusiasts to replace or add a light system to the TRD Pro grille.
Featuring a 10-inch S8 light bar that delivers 6,324 raw lumens, along with two S2 Pro LED light pods, each producing 2,245 raw lumens. Together, these lights provide excellent illumination across lighting zones 1-4, ensuring optimal visibility in various conditions.
With dual independent wiring harnesses, the S8 light bar and the S2 Pro light pods can be controlled separately for enhanced functionality. The S8 light bar illuminates lighting zones 3-4 for greater distance down the trail, while its amber backlight adds a stylish marker light for increased visibility when the main lights are off.
For near-field visibility, the S2 Pros, equipped with a wide cornering, light up zones 1-2, ensuring comprehensive coverage close to the vehicle.
This compact yet high-performance kit is designed to enhance both functionality and aesthetics. It includes everything you need for a seamless installation on the 2025 Toyota 4Runner TRD Pro grille-lights, mounting brackets, wiring harnesses, and more.
Featuring Baja Designs' innovative uService technology, you can easily swap or replace lenses and adjust beam patterns without voiding the warranty, giving you full control over your lighting setup.
Backed by a 30-day satisfaction guarantee and a lifetime limited warranty, this kit ensures reliable performance and peace of mind. Please Note: This kit is designed exclusively for the Toyota Tacoma TRD Pro grille. Some trimming is required, please see instructions.
Key Features:
Kit Includes:
S8 Specifications (Per Light):
S2 Pro Specifications (Per Light):
The Baja Designs Squadron Pro Behind-the-Grille Kit for the 2025-on Toyota 4Runner (Non-TRD Pro/Trailhunter models) is designed with as the ultimate behind-the-grille LED lighting kit. This all-in-one kit offers four Squadron Sport LED off-road lights in multiple lens configurations, mounting brackets, hardware and wiring harness for ease of installation.
Paired with the Squadron Pro that offers 4,095 raw lumens each, giving enthusiasts more intensity to cut through the darkness and illuminate the trails while Not affecting the stock look of the 6th Gen 4Runner.
With the combination of spot and driving combo lens patterns this kit will illuminate zones 1-4 offering safety while on the trails. Backed by our 30-day Satisfaction guarantee and Lifetime Limited Warranty for the ultimate in purchase protection.
ELS Scores:Effective Lighting Score (ELS)
Squadron Pro Spot: ELS 86/ 6.2/ 323'/ 3443
Squadron Pro Driving Combo: ELS 122 degree / 7.2/ 266'/ 3708
Kit Includes:
Note: This kit will Not work on the 4Runner TRD Pro/Trailhunter models.
Specifications (Per Light):
The Baja Designs Advantage:
The Baja Designs Squadron Pro Behind-the-Grille Kit for the 2025-on Toyota 4Runner (Non-TRD Pro/Trailhunter models) is designed with as the ultimate behind-the-grille LED lighting kit.
This all-in-one kit offers four Squadron Sport LED off-road lights in multiple lens configurations, mounting brackets, hardware and wiring harness for ease of installation.
Paired with the Squadron Pro that offers 4,095 raw lumens each, giving enthusiasts more intensity to cut through the darkness and illuminate the trails while Not affecting the stock look of the 6 th Gen 4Runner.
With the combination of spot and driving combo lens patterns this kit will illuminate zones 1-4 offering safety while on the trails.
Backed by our 30-day Satisfaction guarantee and Lifetime Limited Warranty for the ultimate in purchase protection.
ELS Scores:Effective Lighting Score (ELS)
Squadron Pro Spot: ELS 86/ 6.2/ 323'/ 3443
Squadron Pro Driving Combo: ELS 122 degree / 7.2/ 266'/ 3708
Kit Includes:
Note: This kit will Not work on the 4Runner TRD Pro/Trailhunter models.
Specifications (Per Light):
The Baja Designs Advantage:
The Baja Designs Squadron Sport Behind-the-Grille Kit for the 2025-on Toyota 4Runner (Non-TRD Pro/Trailhunter models) is designed with both functionality and visual appeal in mind. This all-in-one kit offers four Squadron Sport LED off-road lights in multiple lens configurations, mounting brackets, hardware and wiring harness for ease of installation.
Paired with the Squadron Sport that offers 3,162 raw lumens each that gives enthusiasts more forward lighting without affecting the stock look of the 6 th gen 4Runner. With the combination of spot and driving combo lens patterns, this kit will illuminate zones 1-4, making this a huge upgrade from stock lighting.
Backed by our 30-day Satisfaction guarantee and Lifetime Limited Warranty for the ultimate in purchase protection.
ELS Scores:Effective Lighting Score (ELS)
Squadron Sport Spot: ELS 112/ 5.3/ 229'/ 1973
Squadron Sport Driving Combo: ELS 112/ 7.1 / 183'/ 2441
Kit Includes:
Note: This kit will Not work on the 4Runner TRD Pro/Trailhunter models.
Specifications (Per Light):
The Baja Designs Advantage:
The Baja Designs Squadron Sport Behind-the-Grille Kit for the 2025-on Toyota 4Runner (Non-TRD Pro/Trailhunter models) is designed with both functionality and visual appeal in mind. This all-in-one kit offers four Squadron Sport LED off-road lights in multiple lens configurations, mounting brackets, hardware and wiring harness for ease of installation.
Paired with the Squadron Sport that offers 3,162 raw lumens each that gives enthusiasts more forward lighting without affecting the stock look of the 6 th Gen 4Runner. With the combination of spot and driving combo lens patterns, this kit will illuminate zones 1-4, making this a huge upgrade from stock lighting.
Backed by our 30-day Satisfaction guarantee and Lifetime Limited Warranty for the ultimate in purchase protection.
ELS Scores:Effective Lighting Score (ELS)
Squadron Sport Spot: ELS 112/ 5.3/ 229'/ 1973
Squadron Sport Driving Combo: ELS 112/ 7.1 / 183'/ 2441
Kit Includes:
Note: This kit will Not work on the 4Runner TRD Pro/Trailhunter models.
Specifications (Per Light):
The Baja Designs Advantage:
The Toyota Tacoma (12-Current) / 4Runner (10 - Current) / Tundra (14 - Current) Fog Pocket Kit allows you to mount 2 Squadron Series auxiliary lights in the factory location. This Plug and Play kit includes two Squadron Sport Amber Wide Cornering lights, two vehicle specific mounting brackets and a wiring adapter, allowing you to use your factory switch and mounting hardware.
The LP4 is the smallest variant in the LP lineup but maintains all of the power and features of its siblings. The LP4 features a total of 8,750 lumens and a 200 degree spread of useable LED light. This light pumps out 7,050 forward projecting lumens and 1,700 lumens of dedicated peripheral lighting courtesy of our patented Integrated Peripheral Technology (IPT). To keep your light performing at its highest potential, the LP4 integrates our proprietary Direct Ducted Cooling (DDC) technology. This feature allows air to travel through the front of the housing, over the rear heat sinks - drastically improving cooling capacity and performance. The addition of red, blue, or green backlight options alongside our original amber on the LP4 Pro gives enthusiasts the choice to customize their vehicle for shows, photo shoots or anywhere they want to bring attention.
The LP4 is the smallest variant in the LP lineup but maintains all of the power and features of its siblings. The LP4 features a total of 8,750 lumens and a 200 degree spread of useable LED light. This light pumps out 7,050 forward projecting lumens and 1,700 lumens of dedicated peripheral lighting courtesy of our patented Integrated Peripheral Technology (IPT). To keep your light performing at its highest potential, the LP4 integrates our proprietary Direct Ducted Cooling (DDC) technology. This feature allows air to travel through the front of the housing, over the rear heat sinks - drastically improving cooling capacity and performance. The addition of red, blue, or green backlight options alongside our original amber on the LP4 Pro gives enthusiasts the choice to customize their vehicle for shows, photo shoots or anywhere they want to bring attention.
KC HiLiTES 5 Inch Apollo Pro Halogen - Single Light - 55W Spot Beam
KC HiLiTES 6 Inch Daylighter Halogen - 2-Light System - 100W Spot Beam
The FLEX ERA® 1 Side Roof Rack Light Mounts are engineered to securely attach FE1 pod lights to the side of the Platform One™ rack system. Designed for a tight, low-profile fit, these brackets minimize protrusion while providing ample adjustability for rearward or downward light output.
WHAT'S IN THE BOX
PERFECTLY PAIRS WITH:
The FLEX ERA® 1 LED Light is the darkness slayer. It is the perfect companion for cruising trails and setting up camp with your buddies. Powerful, bright, and compact, just as the most versatile light in the FLEX ERA Family ought to be.
The KC® Profile 10” SideCast™ Flush Mount Light Kit includes four low-profile lights designed for precision side lighting and trail visibility. Designed specifically to integrate into the Platform One™ roof rack’s side rails, these low-profile, 10” LED lights use advanced TIR optics and our custom BiasBeam™ pattern to cast light from +10° above to -50° below the horizon. Perfect for harnessing the full power of the lights where you need it most, at the campsite or for trailside repairs.
Each P10SC also features DualColor output, allowing you to switch between white light for general visibility or amber light for cutting through dust or for a soft camping scene light. The seamless flush-mount design maintains a clean, low-drag aesthetic while resisting trail damage. This 4-light kit comes ready to wire up using KC’s Power-Ready™ ecosystem, with optional vehicle-specific harnesses available for a plug-and-play experience.
FEATURES:
WHAT'S IN THE BOX
PERFECTLY PAIRS WITH:
The KC® P10SC Lights pair perfectly with the Platform One™ Roof Rack, adding practical lighting without compromising the rack’s clean, low-profile design. Built to complement the rack’s hybrid platform and precision-formed sheet metal construction, the flush mount design keeps everything tucked in tight for a factory-finished look.
The Roof Rack Chase Light Bar Mounts include a pair of heavy-duty brackets designed specifically for the Platform One™ roof rack system and the KC Chase Light Bar (SKU 9801). Each bracket offers flexible mounting options: 1) Install on the back face of the rear extrusion for a flush look, or 2) underneath the rear extrusion when roof clearance allows. With slotted adjustability and a reinforced low-profile design, these mounts keep your chase light bar secure, stable, and ready for the roughest trails.
WHAT'S IN THE BOX
PERFECTLY PAIRS WITH:
KC’s 28" Rear Facing LED Chase Bar (SKU 9801). Featuring integrated tail/brake lights, amber dust lights with strobe capability, along with white floodlights for added visibility, dramatically improving rider safety on the trail or race course.
The KC Gravity® Titan™ 6" Single Light in Spot Beam revolutionizes off-road lighting, and finds itself at home on the front bumpers and A-Pillars of off-road rigs.
At its heart lies the innovative Titan Core, powering 3-Source LED optics. This results in a 1.3x larger Illumination Zone than the Gravity Pro6 lights while also being 1.6x brighter. At the flip of the switch, alter between High Power Mode for intense output and an integrated Amber Dust Light for others to easily see you in dusty conditions.
The Titan features a patented Pass-Through Front Cooling, a cutting-edge design that dissipates heat, ensuring optimal performance and longevity in high-heat, high-demand environments. Experience unparalleled lighting power with the Gravity® Titan™, designed to excel in the most challenging off-road adventure
The 24-25 Toyota Tacoma / Land Cruiser Cyclone LED Engine Tray Kit is an essential upgrade for enthusiasts looking to enhance their vehicle's under-hood organization and accessibility. Made from durable 14GA stainless steel and designed to perfectly bolt on, this tray simplifies the installation of the KC rock light kits while extra holes provide versatility for additional switch mounting. Whether you're looking to tidy up your engine bay or streamline the setup of our (SKU 91040) or (SKU 91041) CYCLONE LED 6-Light Rock Light Kits, this engine tray kit is the perfect solution.
Introducing the Gravity® Titan™ LED Lights. The Titan series elevates the beloved Pro6 lights, increasing brightness, expanding coverage, and integrating an Amber Dust Light for the ultimate, no-compromise lighting solution. The Titan™ 6" Lights in revolutionize off-road lighting, and find themselves at home on the front bumpers and A-Pillars of off-road rigs.
At their heart lies the innovative Titan Core, powering 3-Source LED optics. This results in a larger Illumination Zone while also being brighter. At the flip of the switch, alter between High Power Mode for intense output and the integrated Amber Dust Light for others to easily see you in dusty conditions. The Titan features a patented Pass-Through Front Cooling, a cutting-edge design that dissipates heat, ensuring optimal performance and longevity in high-heat, high-demand environments.
Experience unparalleled lighting power with the Gravity® Titan™, designed to excel in the most challenging off-road adventures.
Iconic Design Meets Unmatched Performance: Introducing the Gravity® Titan™ LED Lights. The Titan series elevates the beloved Pro6 lights, increasing brightness, expanding coverage, and integrating an Amber Dust Light for the ultimate, no-compromise lighting solution. Need we say more?
The KC Gravity® Titan™ 6" Single Light in Wide-40 Beam revolutionizes off-road lighting, and finds itself at home on the front bumpers and A-Pillars of off-road rigs. At its heart lies the innovative Titan Core, powering 3-Source LED optics. This results in a 1.5x larger Illumination Zone than the Gravity Pro6 lights while also being 2.5x brighter. At the flip of the switch, alter between High Power Mode for intense output and an integrated Amber Dust Light for others to easily see you in dusty conditions.
The Titan features a patented Pass-Through Front Cooling, a cutting-edge design that dissipates heat, ensuring optimal performance and longevity in high-heat, high-demand environments. Experience unparalleled lighting power with the Gravity® Titan™, designed to excel in the most challenging off-road adventures.
Introducing the Gravity® Titan™ LED Lights. The Titan series elevates the beloved Pro6 lights, increasing brightness, expanding coverage, and integrating an Amber Dust Light for the ultimate, no-compromise lighting solution. The Titan™ 6" Lights in revolutionize off-road lighting, and find themselves at home on the front bumpers and A-Pillars of off-road rigs.
At their heart lies the innovative Titan Core, powering 3-Source LED optics. This results in a larger Illumination Zone while also being brighter. At the flip of the switch, alter between High Power Mode for intense output and the integrated Amber Dust Light for others to easily see you in dusty conditions. The Titan features a patented Pass-Through Front Cooling, a cutting-edge design that dissipates heat, ensuring optimal performance and longevity in high-heat, high-demand environments.
Iconic Design Meets Unmatched Performance: Introducing the Gravity® Titan™ LED Light Bars. The Titan series elevates the beloved Pro6 lights, increasing brightness, expanding coverage, and integrating an Amber Dust Light for the ultimate, no-compromise lighting solution. Need we say more?
This pre-built Gravity® Titan™ LED Light Bar includes a special bumpstop designed for use with Can-Am X3 overhead brackets, ensuring a perfect fit for your specific vehicle setup. At their heart lies the innovative Titan Core driving 3-Source LED optics, delivering a 1.3x larger Illumination Zone, 1.7x brighter output, and 1.3x more beam distance than the Gravity Pro6. At the flip of the switch, alter between High Power Mode for intense output and an integrated Amber Dust Light for others to easily see you in dusty conditions. Featuring a patented Pass-Through Front Cooling system, the Titan ensures peak performance and durability, even in high-heat, high-demand situations. After experiencing the unparalleled lighting power of the Gravity® Titan™, you'll never look back.