Vehicle Lights

Inspired by endurance racing and tested by KC athletes worldwide the Pro6 shatters all performance benchmarks while providing the most durable and scalable light bar design available today Patented Gravity LED G6 optical inserts to provide exceptional efficiency and light output with a Driving beam pattern and 20 watts of power The patented Infinity Ring(TM) system provides a race-proven housing for the Pro6 Single that is strong durable and gives you a unique look for your vehicleMounting HardwareMounting HardwareMounting HardwareMultiple G6 LED Reflector Optics Utilizing a Combo Driving and Wide-40 Beam patternOffering an efficient high-output to draw it's not uncommon to see over a dozen Cyclones installed on a rig. Everywhere from the under the hood wheel wells the underbelly to the interior of your cabin it's never been easier to put light where it's needed.

Inspired by endurance racing and tested by KC athletes worldwide the Pro6 shatters all performance benchmarks while providing the most durable and scalable light bar design available today Patented Gravity LED G6 optical inserts to provide exceptional efficiency and light output with a Spot beam pattern and 20 watts of power The patented Infinity Ring(TM) system provides a race-proven housing for the Pro6 Single that is strong durable and gives you a unique look for your vehicle The Pro6 Single comes ready to mount to any flat mounting surface with a highly adjustable ball mount. This universal ball mount easily attaches to many vehicles including your Jeep Truck or UTV

Patented Gravity(R) LED G6 optical inserts provide exceptional efficiency and light output with a Wide-40 beam pattern and 20 watts of powerParts Included: 1 LED Flashlight 3 AAA BatteriesParts Included: (1) Waterproof Power Wiring Harness and Bluetooth Control Module Box (6) LED Rock Light Pods (6) Rubber Mounting Pad w- Hardware 6 x KC C-Series RGB LED Rock Light PodsParts Included: (2) 10W KC FLEX Single LED Lights Wiring Harness w-2-Pin weatherproof connectors 30 Amp LED Switch w-PanelParts Included: (2) 20W 2 in C2 LED C-Series LED Flood Lights Performance Wiring Harness w- Weatherproof DT Connectors and Switch The patented Infinity Ring(TM) system provides a race-proven housing for the Pro6 Single that is strong durable and gives you a unique look for your vehicleParts Included: -(2) 40W KC(R) FLEX ERA(R) 3 LED Lights(2) Light Covers Black with Yellow KC LogoWiring Harness and 3 po

Inspired by endurance racing and tested by KC athletes worldwide the Pro6 shatters all performance benchmarks while providing the most durable and scalable light bar design available todayLux at 10 Meters: Spot 981 lxLux at 10 Meters: Spot 981 lxLux at 10 Meters: Spread 1200 lx Patented Gravity LED G6 optical inserts to provide exceptional efficiency and light output with a Driving beam pattern and 20 watts of power The patented Infinity Ring(TM) system provides a race-proven housing for the Pro6 Single that is strong durable and gives you a unique look for your vehicle The Pro6 Single comes ready to mount to any flat mounting surface with a highly adjustable ball mount. This universal ball mount easily attaches to many vehicles including your Jeep Truck or UTV

This automotive wire management is perfect for those who are sick of having exposed wires running up their windshield on their roof rack along their frame or anywhere else on their vehicle. This bulk offering will not include the adhesive tape but the part number to the recommended 3M brand tape is 5952 VHB Tape.Hard Coated Polycarbonate LensLED Bulb: CREE: XPL-XPG2Lux at 10 Meters: Low 400 lx High 700 lxPlug-n-Play for Jeep Wrangler JKLED Source: CREE LEDLED Source: CREE LEDPrecision Die-Cast Aluminum Housing KC's Headlights now feature Low Beam High Beam and Daytime Running Light functionality while improving visibility and clarity over factory 2007-2018 Jeep Wrangler JK headlights. Surrounding our Gravity(R) LED 7 in Headlight is a durable die-cast housing and a hard coated Polycarbonate lens all of which is designed to withstand the harshest climates terrains and driving conditions.

KC's Headlights now feature Low Beam High Beam and Daytime Running Light functionality. Greatly improving visibility and clarity over factory 1997-2006 Jeep Wrangler TJ headlights as well retrofit 7 in round headlight openings on classic domestic European and JDM vehicles. Surrounding our Gravity(R) LED 7 in Headlight is a durable die-cast housing and a hard coated Polycarbonate lens all of which is designed to withstand the harshest climates terrains and driving conditions.

Gravity(R) LED 7 in Headlights feature KC's patented Gravity(R) Reflective Diode system aims LEDs into precision reflectors capturing all light to project it forward.Compliance: D.O.T.D.O.T. Approved Beam3Position OnOffAmber SettingsHard Coated Polycarbonate LensHigh-Low Beam Function KC's Headlights now feature Low Beam High Beam and Daytime Running Light functionality while improving visibility and clarity over factory 2007-2018 Jeep Wrangler JK headlights. Surrounding our Gravity(R) LED 7 in Headlight is a durable die-cast housing and a hard coated Polycarbonate lens all of which is designed to withstand the harshest climates terrains and driving conditions.

KC's Headlights now feature Low Beam High Beam and Daytime Running Light functionality while improving visibility and clarity over factory 1997-2006 Jeep Wrangler TJ headlights. Not to mention our lights work with other 7 in round headlight openings on various vehicles with simple H4 connectors.40 Amp5 PoleEasy To InstallKC 12v Relay Surrounding our Gravity(R) LED 7 in Headlight is a durable die-cast housing and a hard coated Polycarbonate lens all of which is designed to withstand the harshest climates terrains and driving conditions.

Gravity(R) LED 7 in Headlights feature KC's patented Gravity(R) Reflective Diode system aims LEDs into precision reflectors capturing all light to project it forward. High-Low beams come installed in this KC projector headlight to greatly improve visibility and clarity over factory Jeep halogen headlights.D.O.T. Approved BeamDirect Plug-N-Play H13 Replacement for 0718 Jeep Wrangler JKHard Coated Polycarbonate LensHigh-Low Beam FunctionKC Precision Multi-Surface Reflector Optics The Gravity(R) LED Pro 7 in Headlight features KC's patented Gravity GRD technology which is engineered to direct every lumen from powerful LEDs into usable light output. HIGH-LOW-DRL FUNCTION The Gravity(R) LED Pro 7 in Headlight uses a durable die-cast housing and Polycarbonate lens to tolerate the harshest climates and conditions.

The Gravity(R) LED Pro 7 in Headlight features KC's patented Gravity GRD technology which is engineered to direct every lumen from powerful LEDs into usable light output. The Gravity(R) LED Pro 7 in Headlight uses a durable die-cast housing and Polycarbonate lens to tolerate the harshest climates and conditions. The Gravity(R) LED Pro 7 in headlight uses KC's patented Gravity(R) Projector Optic (GPO). Utilizing this proprietary projector lens technology along with a GRD LED core KC engineers were able to deliver a more controlled beam pattern while setting new industry standards in light shape clarity and output.

Gravity(R) LED 7 in Headlights feature KC's patented Gravity(R) Reflective Diode system aims LEDs into precision reflectors capturing all light to project it forward.

KC's 7 in H4 Headlights are significantly brighter than factory Jeep headlights delivering maximum DOT approved candlepower using CAD designed multi-surface reflector optics and powerful 55-60W H4 Halogen bulbs. KC's headlights feature a relay system which allows the operation of high beam and low beam function for increased safety while meeting D.O.T. approved compliance.LED Source: CREE High Power LEDLED Source: CREE High Power LED High-Low beams as well as DRL functionality come installed in this KC projector headlight to greatly improve visibility and clarity over factory Jeep headlights.

Designed to handle extreme off road environments KC 7 in H4 Headlights featured a sealed rubber boot design for H4 bulbs with UV and impact resistant hard coated Lexan lenses. KC's 7 in H4 Headlights are significantly brighter than factory Jeep headlights delivering maximum D.O.T. approved candlepower using CAD designed multi-surface reflector optics and powerful 55-60W H4 Halogen bulbs.COMPATIBLE WITH CYCLONE ROCK LIGHT KITS KC's headlights feature a relay system which allows the operation of high beams while simultaneously providing active low beam Day Running Lamps for safety while meeting D.O.T. approved compliance.

KC's 7 in H4 Headlights are significantly brighter than factory Jeep headlights delivering maximum DOT approved candlepower using CAD designed multi-surface reflector optics and powerful 55-60W H4 Halogen bulbs. Spot Beam Provides focused bright light for maximum forward distance and high speed visibility. KC's headlights feature a relay system which allows the operation of high beam and low beam function for increased safety while meeting D.O.T. approved compliance.IP Rating: IP67IP Rating: IP67IP Rating: IP67IP Rating: IP67IP Rating: IP67IP Rating: IP67IP Rating: IP67IP Rating: IP67IP Rating: IP67IP Rating: IP67IP Rating: IP67IP Rating: IP67Candela: 215000 Cd Driving Beam- SAE ECE street legal beams provide added peripheral visibility and while reaching further than stock lights.

Introducing the Gravity® Titan™ LED Lights. The Titan series elevates the beloved Pro6 lights, increasing brightness, expanding coverage, and integrating an Amber Dust Light for the ultimate, no-compromise lighting solution. The Titan™ Lights in revolutionize off-road lighting, and find themselves at home on the front bumpers and A-Pillars of off-road rigs. CHAR(13) + CHAR(10)At their heart lies the innovative Titan Core, powering 3-Source LED optics. This results in a larger Illumination Zone while also being brighter. At the flip of the switch, alter between High Power Mode for intense output and the integrated Amber Dust Light for others to easily see you in dusty conditions. The Titan features a patented Pass-Through Front Cooling, a cutting-edge design that dissipates heat, ensuring optimal performance and longevity in high-heat, high-demand environments. CHAR(13) + CHAR(10)Experience unparalleled lighting power with the Gravity® Titan™, designed to excel in the most challenging off-road adventures.

Iconic Design Meets Unmatched Performance: Introducing the Gravity® Titan™ LED Light Bars. The Titan series elevates the beloved Pro6 lights, increasing brightness, expanding coverage, and integrating an Amber Dust Light for the ultimate, no-compromise lighting solution. Need we say more? This pre-built Gravity® Titan™ LED Light Bar includes a special bumpstop designed for use with Can-Am X3 overhead brackets, ensuring a perfect fit for your specific vehicle setup. At their heart lies the innovative Titan Core driving 3-Source LED optics, delivering a 1.3x larger Illumination Zone, 1.7x brighter output, and 1.3x more beam distance than the Gravity Pro6. At the flip of the switch, alter between High Power Mode for intense output and an integrated Amber Dust Light for others to easily see you in dusty conditions. Featuring a patented Pass-Through Front Cooling system, the Titan ensures peak performance and durability, even in high-heat, high-demand situations. After experiencing the unparalleled lighting power of the Gravity® Titan™, you'll never look back.

Off-road race tested the Cyclone V2 LED was designed to handle the harshest environments. Featuring an IP68 rated housing the Cyclone V2 LED kit is resistant to moisture and dust. The 5W Cyclone V2 LED light uses a multi-functional compact design delivering 600 lumens of LED output. These extremely bright Cyclone kits are perfect for illuminating your engine bay and any hard-to-see areas under the hood. The Cyclone V2 LED comes in a flood beam pattern to provide a large pattern of light by utilizing an infinite vertical and horizontal beam pattern. This delivers ample illumination over short distances.Cyclone LED lights feature extremely low amp draw and high output in a compact package C-Series light bar features an extruded aluminum housing aluminum core PCBs with thermal management and lexan lenses.

Inspired by endurance racing and tested by KC athletes worldwide the Pro6 Single is set to break all performance barriers while providing the most durable and reliable light design available todayAmber Colored LensCyclone V2 LEDs are a multi-functional and compact auxiliary LED lighting solution. Originally designed for Off-Road Racers as an interior dome light the Cyclone LED light has evolved into an all-purpose light for rock crawling. With their compact 2.2 in diameter flat 0.53 in height and bright flood pattern they are perfect for undercarriage lighting for off-roading at night.

Complete Cyclone V2 LED 6-light rock light kit with Cyclone Lights Premium fuse block with ground post and switch 6 Deluxe Wiring Harnesses (2 x 16ft 2 x 11ft 2 x 8ft) Universal mounts with installation hardwareCyclone V2 LEDs are a multi-functional and compact auxiliary LED lighting solution. Originally designed for Off-Road Racers as an interior dome light the Cyclone LED light has evolved into an all-purpose light for rock crawling. With their compact 2.2 in diameter flat 0.53 in height and bright flood pattern they are perfect for undercarriage lighting for off-roading at night.

Cyclone V2 LED lights feature a die-cast aluminum housing with a centrally located universal mounting hole. These Cyclone kits come with the necessary hardware to attach your Cyclone LED light(s) under the hood of your vehicle with minimal installation time effort or fuss.Cyclone V2 LEDs use a die-cast aluminum base that provides strength rigidity while providing great heat dissipation. The impact-resistant polycarbonate hard-coated lens will survive the toughest of terrains. Rated at IP68 the Cyclone V2 LED is sealed and water-resistant giving you the flexibility to traverse into the most demanding trails.In classic FLEX tradition make it yours with customizable beam patterns trims and covers.The 5W Cyclone V2 LED light uses a multi-functional compact design delivering 600 lumens of LED output and is incredibly bright.

Cyclone V2 LEDs use a die-cast aluminum base that provides strength rigidity while providing great heat dissipation. The impact-resistant polycarbonate hard-coated lens will survive the toughest of terrains. Rated at IP68 the Cyclone V2 LED is sealed and water-resistant giving you the flexibility to traverse into the most demanding trails. KC has focused on mounting solutions for popular applications such as surface angled and flush mounts. While still utilizing the signature center mounting hole the Cyclone V2 now features a provision to integrate a magnetic mounting solution for more ways to customize your nighttime adventure experience.Thermal LED ProtectionColor Temperature: 6000KColor Temperature: 6000KColor Temperature: 6000K The 5W Cyclone V2 LED light uses a multi-functional compact design delivering 600 lumens of LED output and is incredibly bright.

Cyclone V2 LED lights feature a die-cast aluminum housing with a centrally located universal mounting hole. These Cyclone kits come with the necessary hardware to attach your Cyclone LED light(s) under the hood of your vehicle with minimal installation time effort or fuss.Independent Amber LED BacklightCombo Beam Pattern: 12 degree Spot 30 degree SpreadIP68 RatedIP68 water and dust protection with a redesigned industry-leading multi-slide die-cast construction.Combo Beam Pattern: 12 degree Spot 30 degree SpreadCombo Beam Pattern: 8 degree Spot 90 degree SpreadMachined Accent BezelCombo Beam Pattern: 8 degree Spot 90 degree SpreadSignature KC FLEX Aesthetic90 degree Flood Beam Pattern OpticsCyclone V2 LEDs use a die-cast aluminum base that provides strength rigidity while providing great heat dissipation.

Signature triangular design provides maximum output with 3 high powered LEDs in a compact spaceAs compact as 2 LEDs and stronger than 4 in the same spaceChanging the game KC reinvents the traditional with an all-new form factor featuring amber backlighting. IP68 water and dust protection with a redesigned industry-leading multi-slide die-cast construction. With customizable beam patterns bezel colors and covers the flexibility abounds with this new series of lights. Dual spread beam patterns with a spot beam pattern make for the best of both worlds in this high coverage combo light.

Introducing the Gravity® Titan™ LED Lights. The Titan series elevates the beloved Pro6 lights, increasing brightness, expanding coverage, and integrating an Amber Dust Light for the ultimate, no-compromise lighting solution. The Titan™ Lights in revolutionize off-road lighting, and find themselves at home on the front bumpers and A-Pillars of off-road rigs. CHAR(13) + CHAR(10)At their heart lies the innovative Titan Core, powering 3-Source LED optics. This results in a larger Illumination Zone while also being brighter. At the flip of the switch, alter between High Power Mode for intense output and the integrated Amber Dust Light for others to easily see you in dusty conditions. The Titan features a patented Pass-Through Front Cooling, a cutting-edge design that dissipates heat, ensuring optimal performance and longevity in high-heat, high-demand environments. Experience unparalleled lighting power with the Gravity® Titan™, designed to excel in the most challenging off-road adventures.