Air Compressor Accessories

ARB Airlocker Rear 34Spl Nissan Np300

ARB Airlocker Rear Toyota Prado 150 Rr

ARB Airlocker Rockwell 2.5T 16Spl

ARB Airlocker Rr 28 Spl Mitsubishi 8In

ARB Airlocker Rr 28 Spl Mitsubishi 9In

Mounting a compressor in modern day vehicles has become more and more of a challenge as engine bays in modern vehicles have limited room for the installation of aftermarket accessories. To combat this, ARB has introduced a high quality, engineered bracket system to integrate the ARB compressor into your vehicle. The Jeep Wrangler JL Compressor Bracket allows you to install a CKMTA, CKMA, or CKSA (locker only) compressor with optional Air Locker solenoids, quick connect coupling, switch, manifold kit (CKMTA only) and ARB LINX PRV (pressure regulator) under either the left or right front seat. An additional bracket is included for fitment of the 4L ARB Air Tank to the underside of the vehicle (not suitable for the 2.0L e-torque engine). The under seat location was chosen because it caters to the fitment of a twin compressor and doesnt interfere with cargo space. However, due to space constraints, the air tank is mounted underneath the vehicle. The Jeep Wrangler JL Compressor Bracket includes a comprehensive installation guide showing detailed instructions on fitting the twin ARB Compressor, 4L air tank, Air Locker manifold kit with switch, and quick connect coupling to the bracket and the bracket to the vehicle.

ARB Comp Brkt Suits Ranger Raptor Cksa/Ckma

ARB Comp Brkt Suits Tacoma 16-19 Cksa/Ckma/Ckmta

Most four-wheel drivers understand the importance of running the correct tire pressures for different situations and or load variances. This is why it's so important to carry an accurate air pressure gauge and tire inflation equipment in your vehicle, especially when driving off-road. The ARB digital tire inflator makes checking and adjusting your vehicle's tire pressures a fast and simple operation thanks to its large easy to read digital blue backlight display, big thumb operated inflator button and easy access deflator bleed button.

The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate pressure reading via the simple movement of a sliding valve. Corrosion Resistant Brass/Stainless Deflator Tool. Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by Changes in Temperature, Humidity or Altitude. Fully Geared, Solid Brass Precision Movement. Protective Rubber Gauge Guard. Easy to Read Dial with One PSI Increments. Thoroughly Designed and Tested to Ensure Accuracy. Includes Protective Canvas Pouch and Instruction Sheet.

ARB Ford Bronco Compressor Bracket Suits Cksa/Ckma/Ckmt

The Hose Coupling is a US Industrial Standard (ISO 6150 B) female to 1/4 x 18 NPT male fitting. The Hose Coupling can be used to connect an ARB high temperature inflation hose to the 1/4 NPT port of an ARB compressor, tank, or manifold kit.

High Flow Stainless Steel Braided PTFE Hose. Use This To Deliver Air From Your ARB Compressor Throughout Your Vehicle.

High Flow Stainless Steel Braided PTFE Hose. Use This To Deliver Air From Your ARB Compressor Throughout Your Vehicle.

Housing your Air System's gear in a safe and convenient location within your vehicle is not always an easy task. The extreme conditions our vehicles go through demand a solution that is fit for purpose and of the highest quality. In addition to its seven pockets and high-quality construction, ARB's most recent update to the tried-and-true Inflation Case offers key new features such as PVC waterproof and abrasion resistant material and reflective strips for visibility.

Designed to work seamlessly with ARB's maximum performance on-board compressors, the Air Locker Manifold Kit enables easy installation of Air Locker solenoids to an air source such as a compressor or regular gas bottle. With a working pressure of 150Psi (1030kPa), the manifold kit incorporates multiple ports for use with ARB's Pump Up kit, as well as mounting brackets, and a Teflon stainless steel braided hose designed to cool air supply for tire inflation.

ARB O Ring Set (8) Ckma/P

ARB Pressure Supply Kit - 6Mm

A Kit To Allow Mounting Of An ARB US Industrial Standard Quick Connect Hose Coupling Anywhere On A Vehicle. Designed For Use With An ARB Compressor And 07402XX Series Braided Hose. The Kit Includes A Female US Industrial Standard Fitting And A Bracket Which Allows Mounting Of The Fitting In 3 Different Orientations To Suit Every Application.

ARB Traction Pack Rd100/117 Suit Jeep Jk

ARB Traction Pack Rd117/167 Suit Jeep Jk

ARB Traction Pack Rd117/Rd117 Suit Jeep Jk

The Air Compressor Mounting Bracket works with CKSA12, CKMA12, and CKMTA12 compressors.

ARB Universal Switch Coupling Brkt Recessed Mount - 3501050

ARB Wiring Harness Extension|Compr - 180427