Bike

Thule SkiClick Wall Fixation is a storage accessory for Thule SkiClick 7291.

The Thule Thru-Axle Adapter 20mm's patented adapter design allows you to carry 20mm front suspension forks on existing Thule and most other fork-mounted bike carriers

The Yakima LockUp is the locking solution for the Yakima HookUp.

Yakima Rattler Wheel Straps are replacement wheel straps for Yakima fork mount and upright bike racks.

The CURT aluminum bike rack #18088 is designed to be the ultimate in versatility, featuring a lightweight and highly adaptable design. The bike rack itself mounts onto any industry-standard 2-inch x 2-inch receiver and securely locks into place with a built-in anti-rattle, key-operated shank. Once in place, the adjustable cradles accept a wide variety of bike sizes and styles, including wheel diameters up to 29 inches, fat tires up to 4 inches wide and e-bikes. This aluminum platform bike rack weighs only 45 pounds and can accept up to two bikes and 130 pounds in weight capacity. NOTE: For use with any frame-mounted 2" class 3 or higher trailer hitch receiver. Clamp-on bumper receivers and traditional 4" square bumpers should not be used to mount bike racks. Do not exceed receiver weight limits.

Camping on the lake shore, hunting in the Northwoods, biking down a mountain trail -- wherever you are headed this weekend and whichever toys you want to bring along for the ride, you can Bring It with CURT cargo management products. From our expanding line of bike racks to our new and improved cargo straps, we offer cargo management solutions to fit your unique lifestyle. The CURT clamp-on bike rack mounts onto a 2" x 2" ball mount shank by clamping over the top of it. This makes installation quick and simple and allows for full use of the hitch for towing a trailer. The clamp-on bike rack can hold up to three bikes at a time and features adjustable rubber cradles to prevent scratching the bike frames.

CURT electrical connector brackets provide a simple solution for mounting wiring to your trailer hitch on the rear of your vehicle. Connector wires can be a nuisance when they are just lying around. They can get tangled up with cargo and even damaged. An electrical connector left to hang off the back end of your vehicle is an even greater hazard. Secure, protect and optimize the use of your electrical connector by mounting it with a CURT connector bracket. This trailer wire connector bracket is designed to hold a 7-way RV blade socket (#58150 or #58220 only). It features sturdy steel construction with a black finish and can be mounted on your vehicle or trailer hitch. When it comes to plugging in your trailer lights, it pays not to skimp out. CURT electrical is the smart way to ensure that your trailer lights and electrical systems are prepared for the road ahead. Keep the power flowing, no matter where your adventures take you, with quality electrical products from CURT.

There are several different types of connectors used to supply power from a tow vehicle's electrical system to a trailer's wiring system. Some trailers only need the bare essentials -- running lights, brake lights and turn signals -- while others require a connection for reverse lights, electric brakes and auxiliary power. With connectors ranging from simple to complex, it may be the case that the connection between your vehicle and your trailer is not a perfect match. For example, your truck may be equipped with a 6-way round socket, but your trailer may have a 4-way flat plug. For this very common problem, CURT offers a quick and simple solution in the form of an electrical adapter. An adapter is an electrical device that allows a connection to be made between a mismatched trailer plug and vehicle socket. It easily plugs in your vehicle's electrical socket and usually requires no additional wiring. CURT offers an array of adapters to accommodate most types of plugs and sockets, including 4-way flat, 4-way round, 5-way flat, 6-way round, 7-way RV blades and more. This electrical adapter is designed to adapt a 7-way RV blade vehicle socket to fit a 5-way flat trailer plug. It features quality plastic construction and requires no splicing. All CURT wiring and electrical products come with a one-year limited warranty to give you the assurance you need to tow with confidence.

A CURT RV hitch is a trailer hitch that is designed to mount onto the back of a recreational vehicle to add extra cargo space. These hitches are manufactured using CURT's quality processes of robotic welding, thorough cleaning and precise finishing. Our RV bumper hitches are coated with a liquid A-coat followed by a gloss black powder coat finish for lasing resistance against wear and corrosion, and they offer a 2" x 2" receiver tube opening. This particular bumper hitch features a gross trailer weight capacity of 3,500 lbs. and a tongue weight capacity of 350 lbs., making it an excellent choice for towing a bike rack, cargo carrier, boat trailer or small utility trailer behind your RV. It can also be used for towing a recreational vehicle trailer, allowing you to bring with you that ATV, personal watercraft, dirt bike or whatever toys you like to have along for the ride. Be sure to always check the gross trailer weight and weight rating of the bumper before towing. CURT RV hitches are not just another accessory for your camper; they are a product of smart engineering and quality construction to help you achieve that ultimate RV experience every time you hit the road.

A CURT RV hitch is a trailer hitch that is designed to mount onto the back of a recreational vehicle to add extra cargo space. These hitches are manufactured using CURT's quality processes of robotic welding, thorough cleaning and precise finishing. Our RV bumper hitches are coated with a liquid A-coat followed by a gloss black powder coat finish for lasing resistance against wear and corrosion, and they offer a 2" x 2" receiver tube opening. This particular bumper hitch features a gross trailer weight capacity of 3,500 lbs. and a tongue weight capacity of 350 lbs., making it an excellent choice for towing a bike rack, cargo carrier, boat trailer or small utility trailer behind your RV. It can also be used for towing a recreational vehicle trailer, allowing you to bring with you that ATV, personal watercraft, dirt bike or whatever toys you like to have along for the ride. Be sure to always check the gross trailer weight and weight rating of the bumper before towing. CURT RV hitches are not just another accessory for your camper; they are a product of smart engineering and quality construction to help you achieve that ultimate RV experience every time you hit the road.

The NV 2.0 Base is loaded with features that make it one of the most equipped platform racks on the planet. This darkened brute features our foot lever pivot release, adjustable cradles for increased bike fit, and integrated cable locks.

The all-new aluminum Kuat Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while our foot-actuated pivot lever lets you bask in the glory of carrying a bike while unfolding your rack.

The Kuat Transfer v2 is more solid than ever. From the steel construction of the original to a new Flatlock hitch cam for enhanced stability in tow. Plus, a semi-integrated cable lock for an upgrade in security.

Yakima FullBack 3

The Yakima HoldUp EVO +2 turns the 2” HoldUp EVO into a four-bike hauler.

The Yakima LongHaul is a locking, RV approved bike rack for carrying 1-4 bicycles on the back of RVs and travel trailers with 2" hitch receivers. The LongHaul has a tough steel design to remain durable, stable, and secure on your travels.

The Saris 3022 Locking Hitch Tite provides extra peace of mind knowing that your rack is theft-proof. Compatible with all current Saris Hitch Racks.

Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.

The Yakima Ridgeback 2-Bike is a hitch mast bike carrier that goes long on features, including the UpperHand control lever that tilts the mast to make access to your rear hatch a cinch.

The Yakima Ridgeback 4-Bike is a hitch mast bike carrier that goes long on features, including the UpperHand control lever that tilts the mast to make access to your rear hatch a cinch.